iFlight Nazgul Evoque F6D V2 Frame Kit
375.99 د.إ
Availability: 3 in stock
iFlight Nazgul Evoque F6D V2 Frame Kit Descriptions :
The old days are over, getting your electronics full of dirt and wet grass every time you crash . Our latest frame reduces contamination that could build up on your flight controller or ESCs , preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts .
If you want to upgrade your Nazgul Evoque F6 V1 with the DJI O3 Air Unit read this:
– The FC (Flight Controller) to O3 VTX connector is different than the older Caddx Vista/Polar plug. You’ll need to DIY.
– The RX (Receiver) position changed. V1 antenna length is 75mm, V2 is 220mm. You’ll need to DIY.
– The XT60 plug was changed, you’ll need to de-solder the V1 plug and install the V2 plug. Included in the frame kit.
– If you’re going from F6X V1 to F6X V2 all motor wires will have the same length.
– If you’re going from F6X V1 to F6D V2 the back motor wires need to be extended , since you change frame geometry .
– The Antenna TPU in the back comes in 2 Versions; One for the original single DJI VTX antenna, or one for the dual antenna setup. The kit includes a dual antenna TPU. 2x 5.8G LHCP antennas need to be installed .
– The Nazgul Evoque F6 V2 BNF comes with a new Anti Spark filter pre-installed. Please select the option to purchase separately; it’s not included in the frame kit .
Frame wheelbase : 255mm (Squashed X) / 262 mm (DeadCat)
Frame Dimension : L196*W164*H36 mm (Squashed X) / L209*W162*H36 mm (DeadCat)
Arm Thickness : 6mm
Frame Body Dimension : 36mm
Bottom Plate Thickness : 3mm
Top Plate Thickness : 2mm
Upper Plate Thickness : 3mm
Camera Plate Thickness : 3mm
Motor Mounting : 16x16mm
VTX Mounting : 25.5*25.5 φ1.6mm
Weight : 150grams (Included no TPU Parts)
1 x Evoque F6 V2 Frame Kit
1 x O3 Air Unit Heatsink
2 x O3 IPEX to RP-SMA Antenna Pigtails
1 x O3 Dual Antenna
1 x GoPro TPU Base Mount
2 x Anti-slip Battery Pad
4 x TPU Armguard
1 x Front Bumper TPU
1 x Rear Bumper TPU
2 x Anti-slip Battery Pad
2 x Battery Strap (20*250mm)
1 x Battery Strap(20*250mm)
1 x Screw Bag
Check Review iFlight Nazgul Evoque F6D V2 Frame Kit :
| Weight | 0.500 kg |
|---|
