Danger Crew

iFlight Nazgul Evoque F6X V2 Frame Kit

375.99 د.إ

iFlight F6X

Availability: 2 in stock

Purchase & earn 376 points!
SKU: FQ13588 Categories: ,

iFlight Nazgul Evoque F6X V2 Frame Kit Descriptions : 

The old days are over, getting your electronics full of dirt and wet grass every time you crash . Our latest frame reduces contamination that could build up on your flight controller or ESCs , preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts .

Upgrading your I Flight Nazgul F6 V1 To V2 ? : 

If you want to upgrade your Nazgul Evoque F6 V1 with the DJI O3 Air Unit read this:

– The FC (Flight Controller) to O3 VTX connector is different than the older Caddx Vista/Polar plug. You’ll need to DIY.

– The RX (Receiver) position changed. V1 antenna length is 75mm, V2 is 220mm. You’ll need to DIY.

– The XT60 plug was changed, you’ll need to de-solder the V1 plug and install the V2 plug. Included in the frame kit.

– If you’re going from F6X V1 to F6X V2 all motor wires will have the same length.

– If you’re going from F6X V1 to F6D V2 the back motor wires need to be extended , since you change frame geometry .

– The Antenna TPU in the back comes in 2 Versions; One for the original single DJI VTX antenna, or one for the dual antenna setup. The kit includes a dual antenna TPU. 2x 5.8G LHCP antennas need to be installed .

– The Nazgul Evoque F6 V2 BNF comes with a new Anti Spark filter pre-installed. Please select the option to purchase separately; it’s not included in the frame kit .

Specifications : 

Frame wheelbase : 255mm (Squashed X) / 262 mm (DeadCat)

Frame Dimension : L196*W164*H36 mm (Squashed X) / L209*W162*H36 mm (DeadCat)

Arm Thickness : 6mm

Frame Body Dimension : 36mm

Bottom Plate Thickness : 3mm

Top Plate Thickness : 2mm

Upper Plate Thickness : 3mm

Camera Plate Thickness : 3mm

Motor Mounting : 16x16mm

VTX Mounting : 25.5*25.5 φ1.6mm

Weight : 150grams (Included no TPU Parts)

Package included : 

1 x Evoque F6 V2 Frame Kit

1 x O3 Air Unit Heatsink

2 x O3 IPEX to RP-SMA Antenna Pigtails

1 x O3 Dual Antenna

1 x GoPro TPU Base Mount

2 x Anti-slip Battery Pad

4 x TPU Armguard

1 x Front Bumper TPU

1 x Rear Bumper TPU

2 x Anti-slip Battery Pad

2 x Battery Strap (20*250mm)

1 x Battery Strap(20*250mm)

1 x Screw Bag

Check Review iFlight Nazgul Evoque F6X V2 Frame Kit :

Weight 0.450 kg

You may also like…

Shopping Cart
×